HOME > STORES > PIPELINE MAINTENANCE & REPAIR KITS > THREADLOCKERS / RETAINING COMPOUND / THREAD SEALANT > RETAINING COMPOUND
RETAINING COMPOUNDSealXpert™ retaining compounds are designed to seal and secure non-threaded cylindrical shaft-shaft liner
assemblies. SealXpert™ retaining compounds are used to fill inner voids between two components and cure to form a strong precision assembly. It can be applied manually or via a dispenser. Available in 4 types:-
|
RC603 RETAINING COMPOUND
------------------------------------------------------------ ~ Medium strength, low viscosity ~ Contains no fillers and will not foul pipeline system ~ Used for sealing fine threads of pneumatic and hydraulic systems APPLICATIONS ~ Used for slightly oily surface and also can be used for inert surface. Used for retaining hole/shaft fitting of diametral clearance of less than 0.13mm. PACKAGE 50ml/bottle RC648 RETAINING COMPOUND
------------------------------------------------------------ ~ High strength, medium to low viscosity ~ Withstand high temperature to 175°C ~ Seals and secures cylindrical assemblies under 0.13mm diametrical clearance ~ Fixtures in 5 minutes ~ Designed for transition and interference fit APPLICATIONS ~ Used for dynamic loading or periodic loading working conditions. High temperature resistant, cures fast, retaining cylindrical assembly where fit clearance is less than 0.15mm PACKAGE 50ml/bottle |
RC638 RETAINING COMPOUND
------------------------------------------------------------ ~ Maximum high strength, high viscosity ~ Seals and secures cylindrical assemblies up to 0.25mm diametrical clearance ~ Fixtures in 5 minutes ~ Designed for transition and interference fit APPLICATIONS ~ Used for retaining cylindrical assembly where fit clearance can approach 0.26mm and where maximum strength at room temperature is required. Typical application: locking bushings and sleeves into housings and on shafts. PACKAGE 50ml/bottle RC680 RETAINING COMPOUND
------------------------------------------------------------ ~ High strength, medium viscosity ~ Seals and secures cylindrical assemblies from 0.05mm to 0.1mm diametrical clearance ~ Designed for transition and interference fit. ~ Enhances bonding strength APPLICATIONS ~ Used for diametral clearance of less than 0.25mm clearance fit or transition fit with the best fit clearance between 0.05-0.10 mm. It can replace press fit, prevent rust; used for slight rotating (worn) bearing, shaft sleeve etc. fittings, retain belt pulley, bushing, gear wheel, rotor, rebuild hole-shaft fitting parts and out-of-tolerance parts. PACKAGE 50ml/bottle |